![]() ![]() Sorry, you will understand the joke when I tell you, as the others know, I live in the Australian outback. If the file is confidential then I suggest you put it on your laptop and come over to my place so I can see what you are dealing with, without it being pushed onto the Internet. Where the triangluar curve approximations are on a planar surface, FreeCAD can remove some of the extra unneeded edges from those faces when the mesh is converted into a solid with a Part WB Refine.Īnyway, give us some idea, as much information as possible about what exactly the shape is like and we will see if we can help. I don't personally have any experience using Blender, but since it is a mesh modeller it may have tools to help reduce the sizes of the triangles? If it does perhaps you could get a good enough approximation of the curves. Doing so would be a lot of work if the model is complex. Both STL and STEP formats are fairly common CAD/3D model formats and well-supported in many programs. ![]() We have found 16 software records in our database eligible for. It may be able to provide points from which you could create a b-spline or a b-spline surface. Convert Stereolithography CAD data to ISO-10303 STEP product data. ![]() It is not likely that doing would help much in complex cases, but then again perhaps it could. FreeCAD can import points clouds in the points workbench. Does it have lots of curves in 3d like a human skull would be or are we talking about something much easier to model in FreeCAD? If you can share the file, some of us here will help you convert it, if you like? Or at least point you in the right direction.īy the way, I think those 3d scanners can mostly at least, be set to produce a "points cloud" rather than an STL file, in fact they likely produce the STL from a points cloud internally or at least fro ma set of points. If you can't share the file, perhaps you could share a random file that has a similar complexity. The last time I remember someone asking this question, it turned out that they had a very complex shape in the mesh file, wasn't it a human skull or something like that? But either way you see what I mean, if its full of complex curves etc.Īdilgamedev we really need to get some idea of what your shape is or looks like to be able to help much. Some details should appear in the lower left: Key step here. Mine is named extruder-plate.stl: Select the mesh by clicking it in the list on the left side of the window. It's not a degraded file exported from a CAD format like we normally see. Go to the View menu and select a Part workbench: Next, go to the File menu and select Open: Find your STL file and open it. In this case the stl came from a 3d scanner. Hi guys, I'm a 3D Artist who was given the task of converting an STL (3D Scanned) file to STEP file. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |